Session 2026 - SC B1 Package

Table of content

Session papers

• 10117 - Universal Transition Joint 150kV for XLPE cable on the Belgian Grid
• 10157 - Advanced 3D FEM Modeling for Thermal Management of Underground Cable Systems and Crossings
• 10257 - Unlocking Accuracy: Improving Analytical Model for Submarine Cable Impedance from 50 Hz to 10 kHz
• 10281 - Requirements for Feasibility of Superconducting Cables as studied in the CableGnosis Project
• 10282 - Time-domain reflectometry based temperature monitoring on MVAC cables: experience from field and laboratory experiments
• 10283 - Empirical criteria for avoiding thermal runaway and predicting steady state conductor temperature in EHVDC cables
• 10315 - Integrated End-of-Warranty Assessment of the Borssele 220 kV Offshore Export Cables
• 10319 - Technology & analysis of transient overvoltage measurements for a 420 kV sectionalized cross-bonded underground cable system in a Siphon circuit of the Dutch EHV transmission grid
• 10320 - Introduction of 4000 mm2 AlMil conductor in HV cable systems
• 10322 - Unlocking thermal and ampacity headroom of medium-voltage cables: towards a component-aware distribution planning framework
• 10323 - Recent experience with the consequences of cable tunnel flooding on 132kV XLPE cables and joints
• 10325 - An Analytical Curent Rating Calulation Method for Submarine Cables Completely Immersed in Water or Partially Buried in the Seabed
• 10332 - Challenges resolved in Laying of 220kV Underground Cables and Installation of Termination Towers in the High Altitude Steep Terrains of Zojila Pass
• 10355 - Operational insights from the ±320 kV VSC HVDC Cable System: Metallic Pipeline crossing challenges and Thermal Performance Assessment
• 10356 - Routing and Installing EHV AC XLPE Land Cables in Geotechnically Challenging Terrain: Experience from the Himalayas
• 10357 - Design Challenges and Mitigation for HVDC Cable Installation in Metropolitan Cities of India
• 10426 - Insulated Cables Statistics 2023
• 10678 - Electrical and Civil Engineering Challenges for Underground Cable Installations in Urban Settings
• 10679 - XLPE Cable Retrofit for Pipe-Type Presents Engineering Challenges
• 10699 - High-power medium-voltage superconducting cables for Europe’s energy transition
• 10701 - Dynamic cable monitoring using Distributed Fiber Optic Sensing
• 10720 - EMT Modeling and Analysis of HTS Power Cables in Data Center Interconnection
• 10728 - Towards a Coordinated HV Cable Approach: A TSO-Led Response to the Grid Action Plan - Six European TSOs Launch Collaborative Effort to Support HV Cable Supply Chain
• 10822 - Development of 275kV Aluminum Conductor XLPE Cable and Connectors
• 10823 - Development of DC deep water submarine cables that enable installation along optimal routes
• 10824 - Early Detection of External Damage Incidents in Long-Distance Direct Current Submarine Cables
• 10827 - Application of 77 kV Overhead Insulated Cables
• 10991 - Industry-First Dynamic Cable System Solution at 245 kV
• 10992 - Retention System for Submarine Cable without Armour Wires
• 11021 - Non-Invasive Method for Evaluating and Detecting Failures in Bentonite Filling in High-Voltage Cable Ducts during Project Execution
• 11022 - Installation of the 1st 525 kV Insulated Cable in Brazil
• 11025 - Overhead & Insulated Cables Transmission Lines - Brazilian Scenario
• 11060 - Analysis of hourly interruption distribution: the case of the Milan’s medium and low voltage grid
• 11061 - Electrical-Thermal Rating of High-Voltage Cables via EMTP Coupled Modelling
• 11062 - HV Cables Thermal Rating under Steady-State Conditions in Unfilled Ducts
• 11064 - Capacitive PD Sensing and Transmission Line Modeling for Long-Range Cable Defect Detection
• 11065 - Qualification and reliability assessment of slow polarity reversal endurance in HVDC MIND cables for enhanced grid flexibility
• 11066 - Towards predictive monitoring of HVDC Cables: An integrated system for stress, partial discharges and ageing assessment
• 11146 - Development and Qualification of a 420 kV Dry-Type Outdoor Termination
• 11167 - 220 kV Transition Joint for Connecting High-Pressure Fluid-Filled (HPFF) Cable and Cross-Linked Polyethylene (XLPE) Insulated Cable
• 11265 - Calculation and experimental validation of impedance of buried single-core bonding leads
• 11268 - Investigation on Zero-miss Phenomenon in Shunt Reactor Compensated Long HVAC Cable for Offshore Wind Farm
• 11278 - Improving the efficiency of renewable energy cable networks
• 11308 - Development of an Asset Health Index for Underground Power Cable Terminations
• 11341 - AC Electrical Characteristics of Polypropylene for Eco-friendly Thermoplastic Power cable
• 11366 - Subsea reactive power compensation for offshore wind
• 11368 - Stresses on crossing third-party assets due to lighting strikes along underground HVDC cable rout
• 11380 - Nobel passive signal acquisition system for PD monitoring of very long cables based on optical fibre
• 11381 - Safety in Underground High-Voltage Cable: Effective Solutions for People and Infrastructure Protection
• 11382 - Fault events analysis in underground high-voltage cables
• 11384 - Sensitivity analysis for the different types of Partial Discharge sensors related to the measured installation
• 11389 - How does a HVDC cable system react on TOVs?
• 11407 - Evaluation of modified XLPE for 320 kV HVDC Cable use at elevated Conductor Temperatures
• 11408 - Water Treeing Behaviour in XLPE Insulation under the Influence of SAP and Development of Evaluation Method
• 11412 - First results from curvature sensor installed in dynamic cable on floating platform
• 11429 - Frequency-dependent impedance modelling of HVDC cable
• 11513 - Research on 110kV Torsion-Resistant Cable for Offshore Wind Power
• 11514 - Extra-low frequency dielectric relaxation: Characterization of crosslinking byproducts in XLPE HVDC cable insulation
• 11515 - Live detection methods and applications of loop resistance in High-voltage cable grounding systems
• 11516 - Research on UV fluorescence-based localization for insulating fluid leakage and underwater sealing repair method for SCFF submarine cable
• 11517 - Asia’s First 2 GW 500 kV EHVDC XLPE Submarine Cable Project: Engineering and Execution
• 11613 - Enhanced Single-Ended Fault Location in Hybrid Transmission Corridors with Underground Cable Sections Using a Dynamic Sequence Impedance Factor
• 11671 - End To End Implementation of a 400kV 1x2500 mm2 XLPE Cable System With DTS Monitoring
• 11698 - Simplified Versus Realistic Geometries in Thermal Modelling of Cables Installed in HDD
• 11705 - Design of Flexible Cable Installations within Congested Tunnel Systems
• 11709 - State-of-the-art review of post-installation effects on subsea cable thermal properties for rating calculations
• 11712 - Sequence impedance of submarine cables: Part II
• 11728 - Comparative analysis on mechanical behavior according to Armor-types of dynamic cable: A FEM-based design perspective
• 11729 - Study on the Behavior of Power Cables under External Forces in Duct : A Case Study from a EHV Cable System in South Korea
• 11731 - Study on Mechanical Fatigue Loads on Insulation in a Dynamic HVDC Cable
• 11737 - Cables in unfilled ducts – comparison between IEC 60287 and FEM
• 11761 - Ampacity Calculations of Complex Underground Cables Arrangements
• 11787 - Strain–life characterization of lead sheath for submarine cables using small-scale and full-scale bending fatigue tests
• 11789 - A piecewise approximation methodology to analyse cable arcing fault behaviour and characteristic
• 11793 - Research on the Development Mechanism of Submarine Cable Suspension and Fatigue Life Assessment under the Action of Ocean Currents
• 11812 - Improved cable RTTR and early failure detection by combining DTS monitoring with distributed point sensing
• 11824 - 525 kV HVDC Mass Impregnated Cables for 3000 m water depth
• 11827 - Development and Reliability Validation of J-Tubeless Installation Method for Submarine Cables in Offshore Wind Farms
• 11834 - Qualification of 132 kV wet design XLPE cables
• 11836 - Predictive Modelling of XLPE Cable Systems Using Real-Time Monitoring via Distributed Sensing and Edge Integration in the EASY-DC framework
• 11837 - Field Experiences with Surface Inspection and Control Algorithms Employed on Extruded HVDC Cable Accessory Installations
• 11838 - Mechanical design of dynamic cables for floating wind – Technology Qualification combining testing and cross section modelling
• 11844 - Hydrogen-cooled superconducting power link
• 11845 - XLPE cable cores with a new aluminium alloy conductor subjected to ageing in water at high constant temperatures and temperature cycling
• 11846 - A Practical Approach to Dynamic Operation of the HVAC Submarine Cable System 'Fensfjorden' in Norway
• 11848 - Single End Bonding of submarine 3-core cables – Qualification Testing
• 11849 - Dielectric Strength of XLPE Subjected to Temporary Overvoltages of Different Durations
• 11866 - Cables in ventilated conduits: experimental and numerical study of heat transfer and cable ratings
• 11868 - Development and Validation of an Improved Cable Thermal Rating Model for Unfilled Trough Installations
• 11869 - Inter Array Cable Rating – Considerations Beyond IEC standards
• 11870 - Life cycle assessment of submarine power cables for distribution of offshore wind power to land
• 11902 - Application Case of Field Experience through Mechnical Constant Test of 154kV Eco-friendly Polypropylene Insulated Power Cables
• 11923 - Offshore Windfarm Export Cable System Commissioning, is it fit for purpose?
• 12003 - Field Trials of DAS-Based TPID Systems for the Monitoring of Urban Extra High Voltage Cable Systems
• 12005 - Arc Pre-Location in Medium Voltage VLF Cable Testing: Performance Assessment on various Cable Insulation Faults, and Workflow Variation depending on used Equipment
• 12007 - Influence of Polarity Reversal on the dielectric strength of extruded HVDC Cables
• 12058 - Inductive Interference Assessment from 230 kV Submarine and Underground Cable Systems: A Case Study in Southern Thailand
• 12092 - Topside circulating current and lead sheath grounding of export cables for offshore wind
• 12231 - Protective Measures for Medium-Voltage Cable Systems against Nearby Lightning Strikes to Ground
• 12234 - Retrofitting of an External Gas Compression Cable System
• 12266 - Depth of cover Algorithm Validation in the Baltic Sea using time-lapse geophysical Surveys
• 12268 - Field Evidence and Lesson Learned from offshore Power Cable Fault finding using distributed acoustic Sensing
• 12273 - Scalable and efficient production Strategies for HVDC Cables and Accessories: Enabling the Next Generation of Energy Infrastructure
• 12352 - Criteria and Methodologies for Selecting Sheath Voltage Limiters (SVLs)
• 12377 - New methods for the selection of the bonding cable and SVL
• 12398 - Transient Performance and Operational Insights of Hybrid 380 kV AC Transmission Systems
• 12401 - Defining Operational Voltage Bands for HVDC Cable Systems in Multiterminal DC Grids: Rationale for Increasing Type Test Base Voltage from 525 kV to 550 kV
• 12404 - Field-Proven V-Moveout Detector for Real-Time Power Cable Fault Detection using Distributed Acoustic Sensing
• 12436 - Comparison of an autoencoder and an insulation forest model for the condition assessment of low voltage cables based on powerline communication data
• 12445 - Fiber Optics for AI-based Cable Threat Detection in Urban and Submarine Environments
• 12501 - Development and Standardization of 750 kV Extra-High-Voltage AC Cable System for Large Capacity Renewable Energy Transmission
• 12569 - Sequence Impedance Calculation in Three-Core, Double-Layer Armored Power Cables: Accurate and Efficient Modeling Approaches
• 12570 - Current rating in dynamic cables with corrugated sheath and double wire armour
• 12571 - Thermoelectric performance of a 66 kV Submarine Umbilical Cable Integrating Hydrogen Transmission for Offshore Renewable Systems
• 12572 - Current Rating Improvement via CFD Modeling of Underground HVAC Cables in Natural Ventilated Troughs
• 12573 - Water diffusion modeling in power cables: Addressing 1D to 3D geometries using FEM
• 12574 - Accurate modelling of induced voltages on cables with single-point bonded sheaths installed in HV substations
• 12613 - Thermal Modeling and Ampacity of Submarine Three Phase AC Cables with Lead Sheath: IEC 60287 versus Hybrid Analytical-FEA Approach
• 12618 - Assessment of Water Tree Formation in XLPE Insulation Variants to Validate Design of 132 kV Wet-Type Dynamic Cables
• 12634 - Indirect Fault Location in Cable Lines Using Distributed Temperature Sensing

Additional informations